Omron CJ - PROGRAMMING MANUAL 08-2008 Programming Manual page 429

PLC Comparison Charts
Item
Other SET CARRY/
Instruc- CLEAR CARRY
tions
LOAD FLAGS/
SAVE FLAGS
EXTEND MAXI-
MUM CYCLE
TIME
CYCLE TIME
LOAD REGIS-
TER/SAVE REG-
ISTER
SELECT EM
BANK:
EXPANSION DM
READ
INDIRECT EM
ADDRESSING
ENABLE
ACCESS/DIS-
ABLE ACCESS
CV-CS Address
Conversion
Instructions
Block Programming Instruc-
tions
Task Con- TASK ON/TASK
trol OFF
Instruc-
tions
Note *1: Supported only by CVM1 (V2).
*2: Supported only by CPU@@-Z models.
*3: Continuation on same program run supported by CV1M version 2.
*4: Except for CS1G/H-CPU@@(-V1) and CJ1@-CPU@@ CPU Units.
*5: CJ1M CPU Units with built-in I/O only. Some operands differ from those used by the CQM1H.
*6: Supported by CPU Units with unit version 2.0 or later.
*7: Supported by CPU Units with unit version 3.0 or later.
*8: Supported by CPU Units with unit version 4.0 or later.
*9: Supported by CJ1M CPU Units with unit version 2.0 or later.
Mne- CJ1-H/CJ1M Series
monic
CJ1-H-R CJ1-H
STC/ Yes
CLC
CCL, Yes
CCS
WDT Yes
SCAN No
REGL, No
REGS
EMBC Yes
XDMR No
IEMS No
IOSP, No
IORS
FRMCV Yes
TOCV
BPRG/ Yes
BEND,
IF/
ELSE/
IEND,
WAIT,
EXIT,
LOOP/
LEND,
BPPS/
BPRS,
TIMW,
CNTW,
TMHW
TKON/ Yes
TKOF
CS1-H C200HX/HG/
Series HE
CJ1-M
Yes
No
Yes
Yes
No
Yes
Yes
Yes
No
No
No
No
Appendix A
CVM1/CV CQM1H
Series
Yes Yes
Yes No
Yes (*1) Yes
No No
Yes No
Yes No
No No
No No
Yes No
No No
Yes (*1) No
No No
391