Omron CJ - PROGRAMMING MANUAL 08-2008 Programming Manual page 420

PLC Comparison Charts
Item
Data MOVE
Move-
DOUBLE MOVE
ment
Instruc-
MOVE NOT
tion
DOUBLE MOVE
DATA
EXCHANGE
DOUBLE DATA
EXCHANGE
MOVE QUICK
BLOCK TRANS-
FER
BLOCK SET
MOVE BIT
MULTIPLE BIT
TRANSFER
MOVE DIGIT
SINGLE WORD
DISTRIBUTE
DATA COLLECT
EM BLOCK
TRANSFER
BETWEEN
BANKS
EM BLOCK
TRANSFER
EM BANK
TRANSFER
MOVE TO REG-
ISTER
MOVE TIMER/
COUNTER PV
TO REGISTER
382
Mne- CJ1-H/CJ1M Series
monic
CJ1-H-R CJ1-H
MOV Yes
MOVL Yes
MVN Yes
MVNL Yes
XCHG Yes
XCGL Yes
MOVQ No (MOV(021) can be used instead.)
XFER Yes (Number of words to be transferred
specified in binary: 0 to 65535.)
XFERC Yes (*7) (Number of words to be transferred
specified in BCD: 0 to 9999.)
BSET Yes
MOVB Yes (Source bit position and destination bit
position specified in binary.)
MOVBC Yes (*7) (Source bit position and destination
bit position specified in BCD.)
XFRB Yes
MOVD Yes
DIST Yes (Offset value specified in binary: 0 to
65535.)
DISTC Yes (*7) (Offset value specified in BCD: 0 to
8999.)
COLL Yes (Offset value specified in binary: 0 to
65535.)
COLLC Yes (*7) (Offset value specified in BCD: 0 to
9999.)
BXFR No (XFER can be used instead.)
XFR2 No
BXF2 No
MOVR Yes (No address is specified for indirect DM/
EM.)
MOVR Yes
W
CS1-H C200HX/HG/
Series HE
CJ1-M
Yes
No
Yes
No
Yes
No
No
Yes (Number
of words to be
transferred
specified in
BCD: 0 to
6144.)
Yes
Yes (Source bit position and destination bit
position specified in BCD.)
Yes
Yes
Yes (Offset
value speci-
fied in BCD: 0
to 8999.)
Yes (Offset
value speci-
fied in BCD: 0
to 7999.)
No
Yes
Yes
No
No
Appendix A
CVM1/CV CQM1H
Series
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes No
Yes No
Yes (Number Yes (Number
of words to be of words to be
transferred transferred
specified in specified in
BCD: 0 to BCD: 0 to
9999.) 9999.)
Yes Yes
Yes (*1) Yes
Yes Yes
Yes (Offset Yes (Offset
value speci- value speci-
fied in BCD: 0 fied in BCD: 0
to 9999.) to 8999.)
Yes (Offset Yes (Offset
value speci- value speci-
fied in BCD: 0 fied in BCD: 0
to 9999.) to 9999.)
Yes (*1) No
No No
No No
Yes (Address No
is specified for
indirect EM/
DM.)
No (Possible No
for Completion
Flags only
using MOVR)