Omron CJ - PROGRAMMING MANUAL 08-2008 Programming Manual page 13

• Functions Supported for Unit Version 2.0 or Later
CS1-H CPU Units
Function
Downloading and Uploading Individual Tasks
Improved Read Protection Using Passwords
Write Protection from FINS Commands Sent to CPU
Units via Networks
Online Network Connections without I/O Tables
Communications through a Maximum of 8 Network Lev-
els
Connecting Online to PLCs via NS-series PTs
Setting First Slot Words
Automatic Transfers at Power ON without a Parameter
File
Automatic Detection of I/O Allocation Method for Auto-
matic Transfer at Power ON
Operation Start/End Times
New Application MILH, MILR, MILC
Instructions
=DT, <>DT, <DT, <=DT, >DT, >=DT OK
BCMP2
GRY
TPO
DSW, TKY, HKY, MTR, 7SEG
EXPLT, EGATR, ESATR, ECHRD,
ECHWR
Reading/Writing CPU Bus Units
with IORD/IOWR
PRV2
CX-Programmer 4.0 or higher must be used to enable using the functions
added for unit version 2.0.
OK
OK
OK
OK
OK
OK
OK for up to 64 groups
OK
---
OK
OK
OK
OK
OK
OK
OK
OK
---
CS1-H CPU Units
(CS1@-CPU@@H)
Unit version 2.0 or later Other unit versions
---
---
---
---
---
OK from lot number 030201
OK for up to 8 groups
---
---
---
---
---
---
OK from lot number 030201
---
---
---
OK from lot number 030418
---
xiii