Function Setting; Aux Input - Optex HX-40 Installation Instructions Manual

8

FUNCTION SETTING

Dip SW
1 LED ON/OFF SELECTOR
2 IMMUNITY SWITCH
3 AUX INPUT SELECTOR
4 TROUBLE OUTPUT SELECTOR
PIR SENSITIVITY SELECTOR
8-A LED ON/OFF
ON
OFF
8-B IMMUNITY SWITCH
IMMUNITY
STD
8-C

AUX INPUT

OR
AND
(8-A)
(8-B)
(8-C)
(8-D)
(8-E)
POSITION
ON
The LED lights when someone is detected.
(factory default)
The LED does not light even if someone is
OFF
detected
NOTE: For the walk test, move more than 1 m (3.3 ft.) away from
the detector.
POSITION
STD
Suitable for standard applications.
(factory default)
Set this when used in a location with small animal,
IMMUNITY
small size pet or hostile environment.
By connecting a satellite unit (another warning sensor), you can
expand the detection area and correct false alarms.
As a satellite unit, you can use any general no-voltage contact
output (NC) warning sensor, including the following.
<Infrared (AIR) sensors, thermal line (PIR) sensors, magnet
switches, etc.>
POSITION
When both the Main unit and the satellite detect
someone, the alarm is output is activated.
Set to this when not connecting a satellite unit.
AND
Note: The alarm is not output unless both the Main
(factory default)
When either the Main unit or the satellite detects
OR
someone, the alarm is output.
-7-
Do not touch
Dip switch
FUNCTION
Dip switch
FUNCTION
Dip switch
FUNCTION
unit and the satellite detect someone within
60 seconds.
ANTI-MASKING
SENSITIVITY
SELECTOR (8-F)
HX-40
1
HX-40AM
HX-40
2
HX-40AM
HX-40
3
HX-40AM