HikRobot SC6000 Series Quick Start Manual page 8

SC6000 Series Smart Camera Quick Start Guide
refer to the device's technical specifications.
● It is strictly forbidden to wire, maintain, and disassemble the device is powered on.
Otherwise, there is a danger of electric shock.
● Make sure that the device is installed in good condition, the wiring is firm, and the power
supply meets the requirements before powering on the device.
● If the device emits smoke, odor or noise, please turn off the power and unplug the power
cord immediately, and contact the dealer or service center in time.
● It is strictly forbidden to touch any terminal of the device when operating it. Otherwise
there is a danger of electric shock.
● It is strictly forbidden for non-professional technicians to detect signals during device
operation, otherwise it may cause personal injury or device damage.
● It is strictly forbidden to maintain the device is powered on, otherwise there is a danger of
electric shock.
● Avoid aiming the lens at strong light such as lighting, sunlight, or laser beams, etc.,
otherwise the image sensor will be damaged.
● If it is necessary to clean the filter outside the image sensor, please moisten the soft clean
cloth with 75% or less alcohol and gently wipe off the dust.
● It is forbidden to touch the image sensor directly. If it is necessary to clean, please use
wet tissue or soft clean cloth to slightly moisten pure water and gently wipe off dust. It is
forbidden to use alcohol corrosive solution. When cleaning, make sure to power off the
device and unplug the power socket. Please keep the image acquisition window clean. It
is recommended to wipe with clean water. Damage caused by improper maintenance will
not be liable for warranty.
● If the device does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the device yourself. We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.
● Please dispose of the device in strict accordance with the relevant national or regional
regulations and standards to avoid environmental pollution and property damage.
Note
● Check whether the device's package is in good condition, whether there is damage,
intrusion, moisture, deformation, etc. before unpacking.
● Check the surface of the device and accessories for damage, rust, bumps, etc. when
unpacking.
● Check whether the quantity and information of the device and accessories are complete
after unpacking.
● Store and transport the device according to the storage and transport conditions of the
device, and the storage temperature and humidity should meet the requirements.
● It is strictly prohibited to transport the device in combination with items that may affect
or damage the device.
● The device should not be placed with exposed flame sources, such as lighted candles.
● Please read the manual and safety instructions carefully before installing the device.
● Quality requirements for installation and maintenance personnel:
○ Qualification certificate or working experience in weak current system installation and
maintenance, and relevant working experience and qualifications. Besides, the
2