Saving and Recalling Power Meter Configurations
To reduce repeated setup sequences, up to ten power meter configurations
can be stored in the power meter's non-volatile memory. The HP-IB
address and command set, the data stored in the sensor calibration tables
and the zeroing and calibration data are not stored by a preset. The
calibration table selected is not affected.
Power meter configurations are saved and recalled with the
hardkey.
To save the current measurement setup:
Save
1. Press
.
Recall
2. Use the
and
files. When the required file is highlighted press
3. Press
Confirm
If you require to modify the name of a file:
Save
1. Press
.
Recall
2. Use the
and
files. When the required file is highlighted press
power meter displays the file name in a pop up window. Modify
this name (see below) until the desired name is displayed.
Use
or
is currently positioned.
Use
or
Use
Insert Char
3. To confirm your choice press
To recall a measurement setup:
Save
1. Press
.
Recall
2. Use the
and
files. When the required file is highlighted press
3. Press
Confirm
HP EPM-441A User's Guide
Saving and Recalling Power Meter Configurations
hardkeys to scroll through the displayed
.
hardkeys to scroll through the displayed
to modify the character on which the cursor
to move to other characters.
and
Delete Char
.
Enter
hardkeys to scroll through the displayed
.
Power Meter Operation
Save
Recall
.
Save
. The
Edit Name
as required.
.
Recall
2-41