Wlan Module - HP ZBook Fury G11 Maintenance And Service Manual

not touch the connectors with any metallic surface or object, such as metal tools, screws, or
● Do
coins, which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the service cover (see
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Loosen the five captive Phillips screws (2) that secure the battery to the computer.
3. Swing the battery rear edge (3) up and forward until it rests at an angle.
4. Slide the battery (4) up and away from the computer and remove it.
To replace the battery, reverse the removal procedures.

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-3 WLAN module descriptions and part numbers
Description
Intel BE200 Wi-Fi 7 + Bluetooth 5.4, vPro
Intel BE200 Wi-Fi 7 + Bluetooth 5.4, non-vPro
IMPORTANT:
module authorized for use in the computer by the governmental agency that regulates wireless
Service cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a battery that is the sole power source for the computer can cause loss of
To prevent an unresponsive system, replace the wireless module only with a wireless
Preparation for disassembly on page
41).
41).
Spare part number
N39882-001
N39883-001
WLAN module 43