Audio Jack - HP ZBook Fury G11 Maintenance And Service Manual

c. Memory module cover (see
d. Bottom case (see
e. Fans (see
f. System board (see
Remove the RTC battery:
1. Position the system board upside down.
2. Lift the foam tab (1) off the RTC battery cable.
3. Disconnect the battery cable (2) from the system board connector.
4. Pry the battery (3) off the bottom of the system board.
To replace the RTC battery, reverse the removal procedures.
WARNING!
this notebook is CR2025.

Audio jack

To remove the audio jack, use this procedure and illustration.
Table 6-10 Audio jack description and part number
Description
Audio jack (includes audio jack, board, and cable)
Before removing the audio jack, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the service cover (see
components:
Bottom case on page
Fan on page 64)
System board on page
Only replace the battery with a compatible battery type. The compatible battery type for
Service cover on page
Memory modules on page
60)
66)
Preparation for disassembly on page
41), and then remove the following
47)
Spare part number
N22026-001
41).
Audio jack 71