Bottom Case - HP ZBook Fury G11 Maintenance And Service Manual

4. Remove the speakers (5) from the computer.
NOTE:
The absence of or damage to these isolators can result in degraded speaker performance.
To replace the speakers, reverse the removal procedures.

Bottom case

To remove the bottom case, use this procedure and illustration.
Table 6-3 Bottom case description and part number
Description
Bottom case
Before removing the bottom case, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the service cover (see
components:
a. Battery (see
b. WWAN module thermal module (see
c. Memory module cover (see
Remove the bottom case:
1. Remove the following screws that secure the bottom case to the computer:
● 13 Phillips M2.0 × 5.3 screws (1)
● 5 Phillips M2.0 × 1.9 broad head screws (2)
● 2 Phillips M2.0 × 7.6 screws (3)
60 Chapter 6 Removal and replacement procedures for authorized service provider parts
When removing the speakers, make note of the location of the rubber isolator locations.
Service cover on page
Battery on page
Memory modules on page
Preparation for disassembly on page
41), and then remove the following
42)
WWAN module on page
Spare part number
N99105-001
41).
45)
47)