Table of Contents
Advertisement
WLAN module
The WLAN module installs into a slot on the system board.
For a list of available WLAN modules, see
To remove the WLAN module:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the antenna cable (1) from the terminal on the WLAN module.
4.
Remove the Phillips screw (2) that secures the WLAN module to the computer. (The edge of the module
opposite the slot rises away from the computer.)
5.
Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the WLAN module.
(Access panel on page
WLAN modules are designed with a notch to prevent incorrect insertion.
Computer major components on page
(Preparation for disassembly on page
17)
5.
16).
WLAN module
19
Advertisement
Table of Contents
