3.
Detach the touchpad cable (3) from the computer. The cable is attached with double-sided
adhesive.
To replace the touchpad cable, reverse the removal procedures.
NFC module antenna
To remove the NFC module antenna, use this procedure and illustration.
NOTE:
The NFC module antenna is included with the touchpad spare part kit with spare part number
N50690-001.
Before removing the NFC module antenna, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the service cover (see
3.
Remove the battery (see
Remove the NFC module antenna:
1.
Disconnect the NFC module antenna (1) from the NFC module.
56
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Service cover on page
Battery on page
42).
41).
41).