Connecting The Device To Networks - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

Installing and connecting the device
3.3 Connecting the device
3.3.6

Connecting the device to networks

The following options are available for the integration in existing or planned system
environments or networks:
Ethernet
You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and
data exchange with automation devices, e.g. SIMATIC S7.
You need the "SOFTNET S7" software package for this.
PROFINET
PROFINET can be operated via:
• Standard Ethernet interfaces (RT)
SIMATIC NET
Use this software package to create, operate and configure an innovative network for Field &
Control level. You can find information on this under SIMATIC NET
(http://w3.siemens.com/mcms/automation/en/industrial-
communications/Pages/Default.aspx).
The software package and the documentation are not included in the scope of delivery.
Additional information
You can find additional information on the Internet at: Technical Support
(https://support.industry.siemens.com).
50
Operating Instructions, 08/2022, A5E51699601-AA
SIMATIC IPC PX-39A