Technical Specifications; Iot2050 Sm; General Technical Specifications - Siemens SIMATIC IOT Operating Instructions Manual

Technical specifications

9.1

IOT2050 SM

9.1.1

General technical specifications

General technical specifications
Order number
Weight without mounting brackets
Power supply
Brief voltage interruption in accord-
ance with Namur
Current consumption
Noise emission
Degree of protection
Protection class
Degree of pollution
MTBF
Quality assurance
1
2
Motherboard
Processor
RAM
BIOS SPI Flash
Micro SD
Nano SIM card
EMMC
Expansion slots
Interfaces
USB Type A, X60
S7-1200 interface, X110
96
1
The device should only be connected to a power supply which meets the requirements of safe
extra low voltage (SELV) according to IEC/EN/DIN EN/UL 61010-1.
In the event of low supply voltage, the buffer time is reduced
See order documents
approx. 425 g
24 VDC (20.4 to 28.8 V), no galvanic isolation
Up to 10 ms buffer time at 24 V DC and full load
Max. 10 events per hour; recovery time at least 10 ms
Max. power consumption 30W
< 40 dB(A) according to DIN 45635-1
IP20 according to IEC 60529
Protection class III in accordance with IEC 61140
Device is designed for environments with pollution degree 2
13.8 years. This was calculated under conditions of a tempera-
ture of 40 °C and a workload of 100%.
In accordance with ISO 9001
TI Sitara AM6548 HS, 1000 MHz
4 GB
16 MB
Slot for one Micro SD card
Slot for one Nano SIM card
16 GB
1 x mini PCIe for PCIe cards 30 x 50.59 mm or 30 x 26.8 mm
X60-USB: USB2.0 Type A
Interface for S7-1200 SM modules only
Operating Instructions, 03/2024, A5E39456816-AF
9
2
SIMATIC IOT2050