Input Source Connections - Quad Dp 1.2 Input Board - Barco UDX Series User Manual

Input & Communication
3.6 Input source connections – Quad DP 1.2 Input
board
Quad DP 1.2 Input board
DP A
1
Image 3-9
1 Quad DisplayPort channel A input
2 Quad DisplayPort channel B input
3 Quad DisplayPort channel C input
4 Quad DisplayPort channel D input
The yellow LED lights up when valid input sync is detected.
The green LED lights up when the input is selected.
Input specifications – DisplayPort 1.2 inputs
For readability, the video timings listed are summarized. For the full list of video timings, refer to the
appendices.
Pixel rate
Color space
Color depth
Data rate support
For future release
Audio
3D support
Video timings
progressive 4
4: For the full list of video timings, see Appendix
50 R5906112 /09 UDX series
SEL SEL
SYNC DP B SYNC
2
Up to 600 MHz pixel clock
• YCbCr 4:2:2
• YCbCr 4:4:4
• RGB 4:4:4
• 24 bpp
• 30 bpp
• 36 bpp
• 1.62 Gbps: Reduced Bit Rate (RBR)
• 2.7 Gbps: High Bit Rate (HBR)
• 5.4 Gbps: High Bit Rate 2 (HBR2)
• Interlaced support
• HDCP 1.4
not supported
• Field sequential 3D (Active 3D)
• Passive stereoscopic 3D (Passive stereo) converted to active 3D
2D / 3D Layout Mode
2D Standard layout (1x1
layout)
SEL
DP C SYNC DP D
3 4
Supported formats
• Up to 4096 x 2160 @24 Hz
• Up to 4096 x 2160 @30 Hz
• Up to 2048 x 1080 @48 Hz
• Up to 4096 x 2160 @50 Hz
• Up to 4096 x 2160 @60 Hz
• Up to 2560 x 1600 @120 Hz
SEL
SYNC