Configuring The Lens, Zoom-Focus; Configuring The Lens, Shift - Barco UDX Series User Manual

GUI – Installation

8.1 Configuring the lens, zoom-focus

What can be done?
Once a lens has been installed in the projector, you can fine-tune the projected image.
Zoom - Focus
1. In the main menu, select Installation → Lens → Zoom focus.
Image 8-1: Lens menu, Focus & Zoom
2. Use the ▲ or ▼ key to zoom the lens in or out.
Use the ◄ or ► key to focus the lens to far or near.
Image 8-2: Zoom and focus adjustment

8.2 Configuring the lens, shift

What can be done?
The image can be shifted by using the vertical and horizontal lens shift.
Lens shift is only possible when lens shift is calibrated. Please refer to the lens calibration section in
System Settings → Lens Calibration menu.
Vertical and Horizontal Shift
1. To change the position of the projected image, select Installation → Lens → Shift.
Image 8-3: Lens menu, Lens shift
72 R5906112-06 UDX series