Table of Contents
Advertisement
10.9 Assembling and Installing Front Cover
The front cover contains the IR touch sensor.
Caution:
Great care must taken when handling these components, to ensure that the ribbon
cables and pins that connect each portion of the sensor are not damaged during the assembly
and installation process.
1. Place the right front cover and left front cover on a soft, flat surface as shown.
Left Front Cover
2. Carefully slide the right touch electronics to the left connecting the 16-pin plug into the 16-
pin receptacle of the left touch electronics as shown.
Caution:
Pins are easily damaged if not properly aligned.
Slowly slide the extrusion pieces together using the alignment pin for positioning.
Alignment Pin
Planar UltraRes L Series 109" User Manual
020-1434-00A
50
Right Front Cover
Page | 50
Advertisement
Table of Contents
