Related Manuals for Planar UltraRes W Series
Summary of Contents for Planar UltraRes W Series
- Page 1 User Manual ® Planar UltraRes W Series URW105 | URW105-ERO-T Planar UltraRes W Series User Manual Page | 1 020-1420-00A...
- Page 2 When you purchase a Planar product, you get more than a display; you get the service and support you need to maximize your investment. To find the latest warranty and service information regarding your Planar product, please visit http://www.planar.com/support...
-
Page 3: Table Of Contents
ENERGY STAR Certified .................12 Cleaning the Display ......................13 Unpacking and Checking Accessories..............14 Package Contents ......................14 Accessory Kit ........................14 Planar UltraRes W Series – Standard Inputs ..............16 URW105 / URW105-ERO-T ................16 Installing the Display ....................17 Before You Begin ......................17 Tools/Equipment List ..................17 Other Things You May Need ................17... - Page 4 Advanced Settings Menu .................42 17.5 Information Menu .....................55 Using the Touch Screen ....................57 18.1 Connecting a Touch-capable source ..............57 Planar UltraRes W Series Remote Monitoring Software .......... 58 Login ..........................58 Information ........................59 Network ...........................59 SMTP ..........................60 SNMP ..........................61 Control ..........................62 External Control ......................
-
Page 5: Introduction
Interactive, optically-bonded projected capacitive touch model is also available. The Planar UltraRes W Series supports native 5K resolution at up to 60Hz via DP1.4, USB-C and OPS, enabling smooth motion video and mouse tracking. The display's HDMI 2.1 inputs are also HDCP 2.2 compliant. -
Page 6: Safety Information
Safety Information Before using the Planar UltraRes W Series, please read this manual thoroughly to help protect against damage to property, and to ensure personnel safety. • Be sure to observe the following instructions. • For your safety, be sure to observe ALL the warnings detailed in this manual. -
Page 7: Important Safety Instructions
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from any Planar large format LCD display. 10. Only use the attachments/accessories specified by the manufacturer. -
Page 8: Informations Sur La Sécurité
Informations sur la sécurité Avant d'utiliser le Série Planar UltraRes W, veuillez lire attentivement ce manuel pour éviter tout dommage matériel et assurer la sécurité du personnel. • Assurez-vous de respecter les instructions suivantes. • Pour votre sécurité, veuillez respecter TOUS les avertissements détaillés dans ce manuel. -
Page 9: Consignes De Sécurité Importantes
9. Protégez le cordon d'alimentation contre les piétinements et les pincements, en particulier au niveau des fiches, des prises de courant et du point de sortie de tout écran LCD grand format de Planar. 10. Utilisez uniquement les accessoires spécifiés par le fabricant. -
Page 10: Recommended Usage
The following models are warranted for 24 x 7 usage: • 105": URW105, URW105-ERO-T Planar recommends turning off the power for 4 hours per day for optimal performance. For complete warranty details, please visit http://www.planar.com/warranty. Planar UltraRes W Series User Manual... -
Page 11: Important Waste Disposal Information
It is up to the installer to ensure that display placement is changed, thermal shielding is provided and/or additional ventilation is provided to keep the display within its nominal operating parameters. Maximum ambient operating temperatures for the Planar UltraRes W Series are: •... -
Page 12: Energy Star Certified
ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov. Planar UltraRes W Series User Manual Page | 12 020-1420-00A... -
Page 13: Cleaning The Display
• Do not let cleaner seep into the display, as it may cause electrical shock or damage. • Refer to the Planar Display Cleaning Guidelines for more information. Planar UltraRes W Series User Manual Page | 13 020-1420-00A... -
Page 14: Unpacking And Checking Accessories
AC Power adapter for an NEMA 5-15R IEC C14 to US NEMA 5- adapter cable 15R AC cable. (optional) Universal AC Power adapter for an power IEC C14 to EU/UK AC adapter cable. (optional) Planar UltraRes W Series User Manual Page | 14 020-1420-00A... - Page 15 Series Remote Used to control the control display. Two AAA batteries are included but not installed. Passive Dual-tip stylus. 153mm Stylus (6in) length; 7.5mm and 2mm tips (touch model only). Planar UltraRes W Series User Manual Page | 15 020-1420-00A...
-
Page 16: Planar Ultrares W Series - Standard Inputs
Planar UltraRes W Series – Standard Inputs URW105 / URW105-ERO-T URW105 / Description URW105-ERO-T Reset: Hold for 5 seconds to perform factory reset IR: 3.5mm TRS (female) Line Audio Out: 3.5mm TRS (female) SPDIF Audio Out HDMI 1: HDMI, 5K/30Hz, HDCP 2.2, HDR HDMI 2: HDMI, 5K/30Hz, HDCP 2.2, HDR... -
Page 17: Installing The Display
• If the display is a touch model, it is important that the touch frame is not used to lift or support the display or touch performance may be compromised. Planar UltraRes W Series User Manual Page | 17 020-1420-00A... -
Page 18: Prepare Your Installation Location
1080p @ 60Hz and lower resolutions: 20m (65 ft) maximum DisplayPort • DP 1.4: 3m minimum using DP8K certified cable. • DP 1.2: 3m (10 ft) maximum • DP 1.1: 5m (15 ft) maximum USB-C • 2m maximum Planar UltraRes W Series User Manual Page | 18 020-1420-00A... -
Page 19: Mounting
The mount must be secured to the Planar UltraRes W Series display using the four M8- 1.25 VESA mounting locations, and 10mm -15mm thread engagement is required for secure mounting. -
Page 20: Using The Lifting Eye Bolts
The eye bolts should not be used for permanent installation or transportation of the display. When attaching to a lifting mechanism, the angle of the line between the eyehooks and the display must be 45° or greater. Planar UltraRes W Series User Manual Page | 20 020-1420-00A... -
Page 21: Installing Ops Expansion
Installing OPS Expansion ® Planar UltraRes W displays are equipped with an expansion slot that supports the Intel Open Pluggable Specification (OPS). The slot will support OPS devices such as PC’s, SDI modules, HDBaseT receivers, etc. To install an OPS device, remove the protective cover on the display and slide the OPS device firmly into position, and re-install any securing bolts. -
Page 22: Operating The Display
The OSD keypad is located on the rear of the display. OSD Keypad Buttons Descriptions Power Power on/Power off Source Source selection (toggle) Menu Right/Increase value Menu Left/Decrease value Menu Up Menu Down Menu/Exit Menu/Exit Planar UltraRes W Series User Manual Page | 22 020-1420-00A... -
Page 23: Remote Control Receiver
11. Remote Control Receiver The location of the IR remote control receiver is highlighted in the images below. An IR extender cable is included in the accessories package for additional flexibility. Planar UltraRes W Series User Manual Page | 23 020-1420-00A... -
Page 24: Led Indicators
The LED indicator light is located on the rear of the display near the keypad. The following table explains what the different colors and blink patterns mean. LED On Power Status Condition Green Power on Blinking Orange No signal Orange Power saving mode AC off Power off Planar UltraRes W Series User Manual Page | 24 020-1420-00A... -
Page 25: Using The Display In Portrait Mode
Installations where the display is tilted downward or upward at an angle may also be prone to these issues and are not recommended. Note: Failure to follow these instructions will void the warranty. Planar UltraRes W Series User Manual Page | 25 020-1420-00A... -
Page 26: Using The Remote Control
15. Using the Remote Control Below are pictures of the supported Planar remotes. See next section for Hex codes. Included Remote (952-0088-00) Optional Remote (952-0086-00) Planar UltraRes W Series User Manual Page | 26 020-1420-00A... -
Page 27: Ir Command Protocol
The carrier frequency is 38 kHz, with the modulated pulses having a 33% duty cycle. • Commands are sent at a maximum rate of 9 Hz. For example, below is the NEC control code for the ON button of the Planar UltraRes W Series remote control (assuming the default address is used). Binary... -
Page 28: Hex Codes
40AF 03FC Navigates right through on screen menus 40AF 19E6 Navigates down through on screen menus Enter 40AF 12ED Selects the current menu item Planar UltraRes W Series User Manual Page | 28 020-1420-00A... - Page 29 SOURCE 40AF 0FF0 Displays the Zone 1 source selection menu 40AF VOLUME - 1BE4 Volume decrease 40AF VOLUME + 1DE2 Volume increase 06F9 01FE Power On 06F9 09F6 Power Off Planar UltraRes W Series User Manual Page | 29 020-1420-00A...
- Page 30 The following NEC hex codes are also supported and included on the optional Planar IR Remote (see page 26). NEC Data Key Name Address Data Description From Remote 1785 0x06F901FE Power On PRESET 1 1785 0x06F905FA Applies Preset 1 PRESET 2...
- Page 31 Key Name Address Data Description From Remote Selects the DP 2 input for the currently 1785 0x06F92ED1 selected zone Selects the USB-C input for the currently 1785 0x06F92FD0 selected zone Planar UltraRes W Series User Manual Page | 31 020-1420-00A...
-
Page 32: Locking The Keypad And Ir Remote
2. Press the mute button to temporarily turn off all sound. To restore the sound, press the mute button again. Note: The analog audio out is variable. S/PDIF is fixed. Planar UltraRes W Series User Manual Page | 32 020-1420-00A... -
Page 33: Selecting Layouts And Input Sources
16.7 Selecting Layouts and Input Sources The Planar UltraRes W Series models can show 1 source or 2 sources at a time simultaneously (see multi source view on page 35). These sources are referred to as "Zone 1" and "Zone 2" in the Menu. -
Page 34: Navigating Through The Menus
3. Press MENU on the remote control, or MENU/EXIT on the keypad, to return to the previous menu. To exit the menu system, press EXIT on the remote control, or continue to press MENU/EXIT on the keypad until the main menu is reached. Planar UltraRes W Series User Manual Page | 34 020-1420-00A... -
Page 35: Inputs And Views Menu
Select the source to be displayed in Zone 1 when no signal is detected, and Auto Scan Sources is set to Failover. • Options: None, HDMI 1, HDMI 2, DP 1, DP 2, USB-C, OPS; Default: None Planar UltraRes W Series User Manual Page | 35 020-1420-00A... - Page 36 Select from four PiP (Picture-in-Picture) layouts. The layout in orange will be the active layout displayed when the Multi-Source View is set to PiP. PIP Size • Select the size of the PiP (Picture-in-Picture) window. Planar UltraRes W Series User Manual Page | 36 020-1420-00A...
-
Page 37: Image Adjust Menu
Range: 0~100; Default: 50 Contrast • Adjust the white level of the image • Range: 0~100; Default: 50 Color • Adjust the saturation of the image • Range: 0~100; Default: 50 Planar UltraRes W Series User Manual Page | 37 020-1420-00A... - Page 38 Range: 0~100; Default: 50 Gamma • Set the gamma of the image • Options: 1.85, 1.9, 1.95, 2.0, 2.05, 2.1, 2.15, 2.2, 2.25, 2.3, 2.35, 2.4, 2.45, 2.5, 2.55, 2.6. • Default: 2.2 Planar UltraRes W Series User Manual Page | 38 020-1420-00A...
- Page 39 Set the percentage of the image to remove from each edge • Range: 0~20; Default: 0 Revert to Defaults • Reset all settings in the Image Adjust menu to their factory defaults for the current zone only Planar UltraRes W Series User Manual Page | 39 020-1420-00A...
-
Page 40: Audio Menu
• Note: This setting applies only to the internal speakers, and cannot be adjusted for the Line Out connector. Balance • Set the audio balance • Range: 0~100; Default: 50 Planar UltraRes W Series User Manual Page | 40 020-1420-00A... -
Page 41: Presets Menu
• Range: Preset 1~Preset 10 Save • Save the current setup for later recall • Range: Preset 1~Preset 10 Delete • Delete the selected preset • Range: Preset 1~Preset 10 Planar UltraRes W Series User Manual Page | 41 020-1420-00A... -
Page 42: Advanced Settings Menu
DCR: Changes based on brightness of displayed content • Light Sensor: Changes based on environment’s ambient light Local Dimming • Turn on or off local dimming function • Options: On, Off; Default: On Planar UltraRes W Series User Manual Page | 42 020-1420-00A... - Page 43 Options: On, Off; Default: Off • Note: The UltraRes W Series also includes Previous State. If selected, when the display is on and loses power, it will go to the last operational state when power is restored. Power Saving Mode •...
- Page 44 Fast Startup: The display will enter a standby state with partially reduced power, allowing for 3-5 second wait between an ON command being sent, and image being displayed. IR, Keypad, CEC, LAN, DB9 RS232, and USB communication will remain active. Planar UltraRes W Series User Manual Page | 44 020-1420-00A...
- Page 45 Note: The specified DNS server is used when Use Network Time is checked for the Set Date and Time setting. DHCP • Turn DHCP on or off • Options: On, Off; Default: On Planar UltraRes W Series User Manual Page | 45 020-1420-00A...
- Page 46 2. Open the OSD and navigate to Advanced Settings > Network > Upload Certificate. 3. Press enter on the remote and press OK to start upload process. To use your uploaded certificate, change Certificate Type to User (see above). Planar UltraRes W Series User Manual Page | 46 020-1420-00A...
- Page 47 Chinese (Simplified), Japanese; Default: English OSD Rotation • Rotate the OSD menu so that it is readable if the display is mounted in portrait orientation • Options: Landscape or Portrait; Default: Landscape Planar UltraRes W Series User Manual Page | 47 020-1420-00A...
- Page 48 • Select the color to display when there is no signal in a zone • Options: Black, White, Gray, Red, Green, Blue, Cyan, Magenta, Yellow • Default: Black Schedule Submenu Planar UltraRes W Series User Manual Page | 48 020-1420-00A...
- Page 49 Note: The UltraRes W Series shows only 10 events. Set Date and Time • Set the internal system clock. If Use Network Time is unchecked, you can set the following settings individually: Time Zone, Year, Month, Day, Date, Hour, and Minute.
- Page 50 Note: HDR sources connected via HDMI require high speed (18Gbps) compatible cables. Revert to Factory • Reset the EDID type and timings to the default values for the selected connector Planar UltraRes W Series User Manual Page | 50 020-1420-00A...
- Page 51 This menu selects a test pattern to show on the display for diagnostic purposes. Test Patterns • Options: Black, Gray, White, Red, Green, Blue, Magenta, Yellow, Cyan, Gray Ramp, Red Ramp, Green Ramp, Blue Ramp Planar UltraRes W Series User Manual Page | 51 020-1420-00A...
- Page 52 24. When disabled, the status LEDs are always turned off. • Options: On, Off; Default: On Pixel Orbit • Create slight frame motion to help avoid image retention • Options: On, Off; Default: On Planar UltraRes W Series User Manual Page | 52 020-1420-00A...
- Page 53 When enabled, the system will wait for an indication from the OPS module that it has finished its power down sequence, before going into the standby state specified in Power Down Mode • Options: On, Off: Default: Off Planar UltraRes W Series User Manual Page | 53 020-1420-00A...
- Page 54 Provides mapping for the USB ports to each video input. In addition to other USB peripheral devices, the USB-B ports are used to connect the Planar UltraRes W Series touch sensor to touch-capable sources that are connected to the HDMI and Display Port inputs.
-
Page 55: Information Menu
17.5 Information Menu System Information Submenu This menu displays version information for all programmable parts in the system. It also contains the model and serial number. Planar UltraRes W Series User Manual Page | 55 020-1420-00A... - Page 56 Image Information Submenu This menu displays image details for the current zone. If more than one zone is available, you can change zones by setting the Current Zone option. Planar UltraRes W Series User Manual Page | 56 020-1420-00A...
-
Page 57: Using The Touch Screen
You can use the touch screen to control your Windows, Mac or Linux operating system. The Planar UltraRes W Series is HID compliant, delivering up to 50 points of touch on the URW105 touch model on both Windows and Linux without a driver. Single touch only is supported for Mac operating systems. -
Page 58: Planar Ultrares W Series Remote Monitoring Software
Planar UltraRes W Series Remote Monitoring Software Planar UltraRes W Series Remote Monitoring is a software tool that displays information about the display via a web browser. It is also used to configure email alerts. 19. Login Launch a web browser. Enter the IP address, shown in the Network submenu. -
Page 59: Information
20. Information This page displays serial number, model number and firmware version. 21. Network This page allows for network configuration and changing the admin user name and password. Planar UltraRes W Series User Manual Page | 59 020-1420-00A... -
Page 60: Smtp
22. SMTP This page allows configuration of SMTP and email alerts. Planar UltraRes W Series User Manual Page | 60 020-1420-00A... -
Page 61: Snmp
23. SNMP This page allows configuration of SNMP and Trap. Planar UltraRes W Series User Manual Page | 61 020-1420-00A... -
Page 62: Control
24. Control This page allows configuration of the control connection type. Options: Disabled, Telnet, SSH. Default: Telnet Planar UltraRes W Series User Manual Page | 62 020-1420-00A... -
Page 63: External Control
External Control In addition to using the Planar UltraRes W Series remote control and display, there are other methods of controlling the Planar UltraRes W Series display externally: • Using a serial link to send ASCII commands and to receive responses to those commands. -
Page 64: Signal Compatibility
1280x768 49.929 39.593 65.25 VESA CVT 1280x768 59.995 47.396 68.25 VESA CVT-R 1280x768 59.87 47.776 79.5 VESA CVT 1280x768 74.893 60.289 102.25 VESA CVT 1280x768 84.837 68.633 117.5 VESA CVT Planar UltraRes W Series User Manual Page | 64 020-1420-00A... - Page 65 CEA-861-F, VIC 16, with vertical parame- ters doubled 1920x2160 59.988 133.293 277.25 VESA CVT-R 2560x1440 59.951 88.787 241.5 VESA CVT-R 2560x1600 59.972 98.713 268.5 VESA CVT-R 3840x2160 23.999 52.438 209.75 VESA CVT-R Planar UltraRes W Series User Manual Page | 65 020-1420-00A...
- Page 66 SMPTE 274M, CEA-861-F Format 16 UHDTV 3840x2160 CEA-861-F Format 93, HDMI 1.4b VIC 1 3840x2160 56.25 CEA-861-F Format 94, HDMI 1.4b VIC 2 3840x2160 67.5 CEA-861-F Format 95, HDMI 1.4b VIC 3 Planar UltraRes W Series User Manual Page | 66 020-1420-00A...
- Page 67 CTA-861-G Format 121 5120x2160 52.800 396.000 CTA-861-G Format 122 5120x2160 55.000 396.000 CTA-861-G Format 123 5120x2160 66.000 396.000 CTA-861-G Format 125 5120x2160 112.500 742.500 CTA-861-G Format 126 5120x2160 135.000 742.500 Planar UltraRes W Series User Manual Page | 67 020-1420-00A...
-
Page 68: Color Subsampling Report
4K @ 50/60 Hz USB-C 5K @ 50/60 Hz OPS 4K @ 50/60 Hz OPS 5K @ 30 Hz HDMI 1-2 4K @ 50/60 Hz HDMI 1-2 All Other Supported Timings Planar UltraRes W Series User Manual Page | 68 020-1420-00A... -
Page 69: Power Consumption
OPS device is connected USB devices are connected Accessories attached to the C13 AC outlet and should be taken into account when calculating power draw for your unique installation. Planar UltraRes W Series User Manual Page | 69 020-1420-00A... -
Page 70: Specifications
99.1" x 43.8" x 3.6" (2517.5mm x 1091.2mm x 88.6mm) 1112.0mm x 90.6mm) Display Edge to Active Area 1.1" (28.8mm) 1.3" (31.8mm) left and right, 1.3" (32.2mm) top and 1.7" (42.2mm) bottom Planar UltraRes W Series User Manual Page | 70 020-1420-00A... - Page 71 Touch (ERO-T model only) Surface Treatment AG+AF Protective Glass 3mm with AG+AF coating Touch Technology Projected Capacitive: 50 points Touch Interface USB-B Supporting OS Windows 8, 10, 11, Mac OSX and Linux Planar UltraRes W Series User Manual Page | 71 020-1420-00A...
- Page 72 Passive Pen Item Specification Weight 15g (0.5 oz) Length 153mm (6in) Stylus Tips 2 tips, 2mm and 7mm Tips Active Force 250 ± 50g Planar UltraRes W Series User Manual Page | 72 020-1420-00A...
-
Page 73: Dimensions
Dimensions 25. URW105 Planar UltraRes W Series User Manual Page | 73 020-1420-00A... -
Page 74: Urw105-Ero-T
26. URW105-ERO-T Planar UltraRes W Series User Manual Page | 74 020-1420-00A... -
Page 75: Troubleshooting During Installation
This section includes troubleshooting information about different issues you may encounter during the installation process or after your display has been running for some time. If you are not able to solve your issue in this section, please contact Planar’s Technical Support team for assistance. -
Page 76: Symptom: Can't Get Pc To Output 4K @ 24/30/60 Hz
The connector overmold is too large, which can cause the pins not to contact properly on some cards. Solution If using DisplayPort, make sure the connector overmold isn’t too large. Overmold Overmold is is too wide within specification Planar UltraRes W Series User Manual Page | 76 020-1420-00A... -
Page 77: Symptom: Ir Isn't Working Properly
Reposition the display so it is vertical to slightly tilted back. Possible Cause There are items blocking the IR sensors from emitting or receiving Solution Clean display and sensor windows around the display. Planar UltraRes W Series User Manual Page | 77 020-1420-00A... -
Page 78: Accessing Planar's Technical Support Website
• User Manual • RS232 User Manual • Outline drawings • Standard warranties • Planar support hotline number and email • Firmware (contact Planar support via email or phone) Planar UltraRes W Series User Manual Page | 78 020-1420-00A...