Planar UltraRes URL109-MFT User Manual page 24

2. Position the two vertical column assemblies as shown on a flat surface. Noting the
orientation of threaded holes along the support beams lower face, place the ends of the
first support beam over the lower hole pattern on the top of the vertical columns engaging
the alignment pins between the parts as shown.
Threaded Holes
Orientation
Threaded Holes
Orientation
Planar UltraRes L Series 109" User Manual
020-1434-00A
24
Lower Hole
Pattern
Support
Beam
Alignment Pins
Under Flange
Vertical Column
Assembly
Page | 24