Installing the Display
This section explains how to install your display. We suggest that you read the entire section
before you attempt to install the unit.
8.
Before You Begin
Make sure you have all the items in these lists before you begin unpacking and installing your
display(s).
8.1
Tools/Equipment List
Depending on your installation, you may need one or more of the following items:
•
String/string level
•
Digital/laser level
•
Ladders/lift
•
Power tools
•
Back brace
•
Stud finder (if hanging display on a wall)
8.2
Other Things You May Need
•
LCD screen cleaner or LCD wipes - available at most electronics stores
•
At least two very strong people to help lift unit into place
8.3
Plan Your Installation
You should have a detailed plan of how the units are to be configured. The plan should include
calculations for the following:
•
Power
Model
URW105
•
Cable runs
•
Ventilation and cooling requirements
•
If hanging display on a wall, location of studs in the wall
•
For touch model best performance, the display must be mounted in a vertical to slightly
tilted back orientation.
•
If the display is a touch model, it is important that the touch frame is not used to lift or
support the display or touch performance may be compromised.
Planar UltraRes W Series User Manual
020-1420-00A
17
Max Current @ 120VAC
(Excluding AC Output)
4.9A
Max Current @ 120VAC
(Including AC Output)
7.9A
Page | 17