Planar UltraRes URL109-MFT User Manual page 97

Vertical Active
•
The number of active lines in a field
•
Range: 0~4095
Vertical Refresh Rate
•
The number of fields per second rounded to the nearest Hz
•
Range: 0~120
Enable HDR
•
Indicate to the source that HDR content is supported
•
Options: On, Off; Default: On
•
Note: HDR compatible inputs are HDMI 1, HDMI 2 and the OPS.
•
Note: Displaying HDR content requires an HDR compatible source and HDR encoded
content.
•
Note: HDR sources connected via HDMI require high speed (18Gbps) compatible cables
Fully Specified
•
Determine how the final detailed timing is calculated. If disabled, it is calculated based on
Horizontal Active, Vertical Active, and Vertical Refresh Rate values. If enabled, it is
calculated based on all of the EDID values except for Vertical Refresh Rate.
•
Options: Disabled, Enabled
•
Note: This setting should only be enabled by advanced users.
Pixel Clock
•
The value of the pixel clock, in megahertz
•
Range: 0~600.00, in 0.01 increments
Horizontal Blanking
•
The number of non-active pixel clocks in a line
•
Range: 0~1023
Horizontal Front Porch
•
The number of pixel clocks in the horizontal front porch
•
Range: 0~1023
Horizontal Sync Width
•
The number of pixel clocks in the horizontal sync pulse
•
Range: 0~255
Vertical Blanking
•
The number of non-active lines in a field
•
Range: 0~255
Vertical Front Porch
•
The number of line times in the vertical front porch
•
Range: 0~255
Planar UltraRes L Series 109" User Manual
020-1434-00A
97
Page | 97