Zone 3
•
Select the source displayed in Zone 3
•
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP; Default: HDMI 3
Zone 4
•
Select the source displayed in Zone 4
•
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP; Default: HDMI 4
Zone 1 Secondary
•
Second input to scan when Auto Scan Sources is set to Failover
•
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP; Default: HDMI 1
Auto Scan Sources
•
Select whether the display will automatically scan for a valid source on any input or zone
that does not have a source currently displayed.
•
Options: Off, On, Failover; Default: Off
•
Off: Display will stay on current selection of inputs.
•
On: Scanning will begin on the currently selected source and move sequentially through
the inputs in the order listed below – stopping once a valid source is obtained.
•
Search Order: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP
•
Failover: Display will scan selected Zone 1 input and selected Zone 1 Secondary input for
a valid source. Only applies to Zone 1.
Planar UltraRes L Series 109" User Manual
020-1434-00A
81
Page | 81