Table of Contents
Advertisement
10.6 Installing LED Columns
1. Remove column 1 from packaging box along with any additional protective wrap. If
installing into a recess, remove the column edge guards; otherwise, leave column edge
guards attached.
2. Wearing the provided gloves, hang column 1 near the left edge of the mount bars,
ensuring the upper and lower hanger brackets of the column are hooked on the mount bar
flanges as shown.
Note: The mount bars have flanges along the length that can limit columns from being slid
left. Be sure the placement of the column is far enough left that it can be slid over to the
left as far as possible.
Planar UltraRes L Series 109" User Manual
020-1434-00A
33
Hanger Bracket
Hook
Mount Bar
Flange
Page | 33
Advertisement
Table of Contents
