Table of Contents
Advertisement
7. Installation of the front cover assembly requires a close fit to the speakers, power
supplies, and keeping cables clear of small spaces. The two main flat flex cables must be
in the correct recessed locations. The power supply cables, which were connected in a
previous assembly step, need to be positioned behind the flange. And the two cable
connections required at the split need to be positioned flat against the electronics box
surface. All other cabling and connectors must be routed along the internal components as
the left and right electronics assemblies were shipped.
Flat Flex Cable
Planar UltraRes L Series 109" User Manual
020-1434-00A
53
Cable Routing
Flat Flex
Cable Recess
Page | 53
Advertisement
Table of Contents
