Installing The Planar Ultralux Series; Before You Begin; Tools/Equipment List; Other Things You May Need - Planar LUX70-ERO-B Installation Manual

Installing the Planar
UltraLux Series
This section explains how to install a Planar UltraLux display. We suggest that you
read this entire section before you attempt an installation.

Before You Begin

Make sure you have all the items in the following lists before you begin unpacking
and installing your Planar UltraLux Series.

Tools/Equipment List

Depending on your installation, you may need one or more of the following items.
Note that depending on the size of the display, this list may be different.

Other Things You May Need

Plan Your Installation

You should have a detailed plan of how the UltraLux is to be installed. The plan
should include calculations for the following:
• #1 and # 2 Phillips screwdriver
• Drill and bits
• Nut drivers
• Pencil
• Digital/laser level
• Ladders/lift
• Back brace
• Stud finder (if hanging LCD modules on a wall)
• A 50-50 mix of water and isopropyl alcohol, as well as cheesecloth to clean the
displays.
• At least two capable people to lift LCDs into place.
• Floor/wall load. Make sure the floor/wall is strong enough to support the
weight of the UltraLux Series.
• AC receptacle in safe zone where boxes are to be stored.
Planar UltraLux Series Installation Guide 13