6. Position the left side trim near the left side of the display and align the ends of the touch
flex cables together as shown and press the connectors together. Gently fold the cable
assembly over and slide the end of the connection along the inside surface of the left side
trim.
Left Side Trim
7. While moving the left side trim corner up to meet the top left trim corner, carefully coil the
remaining flex cable so that it fits in the corner of the top and side trim. The magnets on
the side of the display column will hold the side trim in place. Install a M3 x 20 FHMS BLK
to secure the upper left corner as shown.
M3 x 20 FHMS BLK
Planar UltraRes L Series 109" User Manual
020-1434-00A
59
Page | 59