Suzuki FU150SC Manual page 72

5-37 CHASSIS
ACAUTION
* Apply brake fluid to all of the seals, brake caliper bores
and pistons before reassembly.
Specification and classification : DOT 4
e Install the piston seal @) and dust seal @ ,
e Install the piston @) .
Au 99000-25100 : SUZUKI SILICONE GREASE
« Apply grease to the brake caliper holder.
« Install the brake pads.
e Tighten the brake pads mounting bolt @) to the specified
torque .
e After touching the brake hose union to the stopper (A) ;
tighten the brake hose union bolt(5) to the specified torque.
) Brake pad mounting bolt ® : 18 N-m (1.8 kg-m)
Brake hose union bolt (5) + 23 N-m (2.3 kg-m)
NOTE:
Before remounting the brake caliper, push the brake caliper
pistons all the way info the caliper.
AccauTion
Bleed air from the system after reassembling the brake
caliper. (See page. 2-16)
a(S
ACAUTION
_Circilp with special tool.
09900-06108 : Snap ring pliers
« Remove the O-ring 6) :
e Remove the dest seal.
ACAUTION
09900-06105 : Snap ring pliers
CHASSIS 5-38