Suzuki FU150SC Manual page 63

5-19 CHASSIS
INNER AND OUTER TUBE
Inspect the inner tube sliding surface and outer tube sliding
surface for any scuffing.
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse order of
removal and disassembly. Pay attention to the following points:
AXCAUTION
* Wash each metal part with cleaning solvent before
reassembly.
* Never re-use fork oil left over from the last serviceing.
* Replace the oil seal and dust seal with new ones
when reassembly.
e Apply THREAD LOCK "1342" to the damper rod bolt and
tighten it to the specified torque with the special tools.
Damper rod : 23 N-m (2.3 kg-m)
oS TE 99000-32050 : THREAD LOCK "1342"
09900-00410 : Hexagon wrench set
09940-34520 ; T-handle
09940-34561 : Attachment "D"
e Install the oil seal qd) with the special tool.
NOTE :
Before installing the oil seal Wand dust seal(3) apply a small
quantity of SUZUKI SUPER GREASE "A" to the lip of oil seal
and dust seal.
AGH 99000-25010 : SUZUKI SUPER GREASE "A"
09940-52860 : Front fork oil seal installer
e Install the stopper ring @ and dust seal ©).
AXCAUTION
Make sure that the stopper ring @ fitted securely.
NOTE:
When adjusting the oil level, remove the fork spring
and compress
the inner tube fully.
: bottom.
torque.
CHASSIS 5-20