Suzuki FU150SC Manual page 35

3-31 ENGINE
« inspect the balancershaft and key wear or damage.
REASSEMBLY
e Install the wave washer a) driven gear @ , Spring @ : :
Balancer damper @
« Reassemble the balancer shaft' in the reverse order of
disassembly
TRANSMISSION
DISASSEMBLY
e Disassemble the transmission gears as shown in the illustration.
NOTE :
When removing the 2nd drive gear, use a gear puller and a proper attachment.
ENGINE 3-32
REASSEMBLY
NOTE :
Before installing the gears, coat lightly MOLY PASTE or engine oil to the driveshaft and countershaft.
99000-25140 : SUZUK! MOLY PASTE
AXCAUTION
2nd DRIVE GEAR
A
Countershaft length @) : 88.0 + : mm
(Low to 2nd)
99000-32030 : THREAD LOCK SUPER "1303"
NOTE :
* Take care not to smear TOP drive gear with THREAD LOCK
'ns
SUPER "1303".
* This procedure may be performed only twice before shaft
replacement is required.