Suzuki FU150SC Manual page 40

3-41 ENGINE
NOTE :
This primary nut
has left hand threads.
cy
te
le u
1.0 kg-m
ENGINE 3-42
e¢ Apply THREAD LOCK SUPER "1303" to the threads of
gearshift cam stopper arm shaft, and tighten it to the specified
torque.
99000-32030 : THREAD LOCK SUPER "1303"
P) Gearshift cam stopper arm shaft ; 10 N-m (1.0 kg-m)
« Align the hole @ of gearshift cam plate with pin @ of
gearshift cam.
e Tighten the gearshift cam plate bolt ® to the specified
torque,
(8) Gearshift cam plate bolt : 10 N-m (1.0 kg-m)
99000-32030 : THREAD LOCK SUPER "1303"
Install the washer @ onto the gearshift shaft.
e Install the gearshift shaft assembly to the crankcase.
e Fit the gearshift spring ©) to the gearshift arm stopper ©
correctly.
NOTE :
When replacing the gearshift arm stopper © apply a small
quantity of THREAD LOCK SUPER "1303" to the thread of it,
and tighten to the specified torque.
99000-32030 : THREAD LOCK SUPER "1303"
") Gearshift arm stopper : 19 N-m (1.9 kg-m)