Suzuki FU150SC Manual page 42

3-45 ENGINE
Install the two dowel pins and new gasket.
e When installing the clutch cover, face the clutch release rack
to the pinion gear side.
e Tighten the clutch cover bolts to the specified torque.
) Clutch cover bolt : 10 N-m (1.0 kg-m)
ACAUTION
piston pin.
e Place a clean rag over the cylinder base to prevent piston
pin circlip from dropping into crankcase, and then fit the piston
ACAUTION
side.
ENGINE 3-46
INCORRECT
RGIS
ee
R (1st)
RN (2nd)
EX 4
© 2nd ring e ae side
* Lower side ral
® 1st ring
IN ® Spacer