Abus AZAA10000 Installation Manual page 62

11. View Log Menu
The panel keeps a log of events (for example, alarms and times of setting/unsetting). An installer
or master user can read the log when the system is completely unset. Note that no other user
type can read the log.
11.1 Log Events
To comply with EN50131-1:2006 for grade 2 systems, the log is divided internally into two
portions: mandatory events and non-mandatory events. The installer can view either of these lists
separately or see all log events in one list. Additionally, the EN 50136 Log stores SPT events to
comply with this standard. Please refer to Appendix C on page Fehler! Textmarke nicht definiert.
for a description of each log message.
Mandatory events are those that are recorded to comply with EN 50131. Non-mandatory events
are other events not needed to comply with EN 50131.
The entire log stores its records for at least 10 years without power.
The first three events of the same type (e.g. tamper alarms) that occur in the same unset or set
period are logged in the mandatory log. Any further events of that type are logged in the non-
mandatory log.
When you are viewing a log event, pressing ➢ may display additional information.
12. About Menu
The About menu offers information about the panel and keypads.
12.1 Panel
This option shows:
•
The panel model (Terxon SX).
•
The panel's name, if defined in System Options, Hardware, Panel Name (page Fehler!
Textmarke nicht definiert.).
•
The panel's software (firmware) version number.
Press  or  to see each item of information.
12.2 Bus
This shows the total number of devices on the bus. Since the bus can have only keypads, this is
the same as the number of keypads.
12.3 Keypads
If you select a keypad by scrolling up or down the list and then press ✓, the display shows the
version of firmware running on the keypad.
If you find that the Keypad option does not display an individual keypad's software version, you
can check the keypad by pressing the "A" and "✓" keys at the same time.
62