Table of Contents
Advertisement
Use this zone type to complete setting when the exit mode is Lock Set (see page 48). This
zone type is designed for a normally open switch (one that is open when the lock is locked).
Note that this zone type is armed during setting and when the system is set.
A Lock Set zone can take the Inverted attribute.
Security - SC (23)
This zone type is intended for use if keypads are located in areas that are accessible to non-
authorised people while the system is unset. When a Security zone is active, the panel
disables the buttons on all keypads. The display and proximity tag sensor continue to
function normally.
If an authorised user presents a proximity tag to the keypad, the panel activates the keys so
that the user can operate the system. The panel deactivates the keys when that user is
finished.
The keypad buttons will work normally when the system is set.
Tamper Return - TR (24)
This zone type makes it possible to monitor a tamper return wire from an external sounder.
The panel monitors a Tamper Return zone at all times.
When triggered in the unset condition, only internal sounders operate. When triggered in
the set condition, the alarm response (see page 49) determines whether the external siren,
strobe and communications also respond to the alarm.
36
Advertisement
Table of Contents
