Table of Contents
Advertisement
5.1.4 Attributes
Table 5 shows the zone attributes and the zone types they apply to. You can assign more than one
attribute to a zone. The display shows only the available attributes for the zone type you select.
Table 5: Zone attributes available for zone types
Zone Type
Normal Alarm
24 Hour Alarm
Final Exit
Entry Route
Key Switch Moment.
Key Switch Latched
HUD Fault
Log Only
Exit Terminate
Security
Chime1 and Chime2
When enabled, the system gives a non-alarm chime when the zone is triggered. For all but
Exit Terminate zones, the chime operates only when the system is unset. For Exit
Terminate, the chime operates when the system is set or unset.
Chime1 and Chime 2 have different tones and can be used to distinguish zones.
Soak Test
Use this zone attribute if you want to place under long term test a detector that you
suspect is giving false alarms. Zones with this attribute are disabled for 14 days after you
return the panel to user/unset mode. If the zone remains inactive for the whole fourteen
days then after midnight on the 14th day, the panel returns the zone to normal use.
If the zone is activated during those 14 days while the system is set, the panel logs the
event as a "Soak Fail Znn Alm" (nn is the zone number) without sounding any sirens or
starting communications. The panel also lights the red LEDs around the navigation key on
the keypad to alert the user when they unset the system. An installer must key in their
access code to reset the alert.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Zone Attributes
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
37
Advertisement
Table of Contents
