Saving Configurations; Save Config Menu; Restarting The Controller; Restart Menu - Accusys ACS-9910 User Manual

Chapter 5 – Configuration

Saving configurations

Any configuration changes made by the administrator must be saved to the non-volatile
memory (NVRAM). This is done in the Save Config Menu located at Main Menu > Save
Config Menu

Save Config Menu

8 Save Config No / Yes

Restarting the controller

The controller must be restarted for any configuration changes made within the Edit Chassis,
Quick Setup, Edit Array, and Edit Chans menus to take effect. Configuration changes made
from the RS232 Params, User Params and Utility menus do not require restart.

Restart Menu

9 Restart 9.1 Shutdown
9.2 Restart
Choose to either shutdown or restart the controller and confirm by selecting Yes.
Any changes made in this menu will cause data on the drives to be
permanently erased. ACS-9910 should be offline before configuration changes
are saved.
ACS-9910 must be restarted for any configuration changes made within the
Edit Chassis, Quick Setup, Edit Array, and Edit Chans Menus to take effect.
53