Table of Contents
Advertisement
LUN mapping
How to configure ACS-9910
There are two ways to configure ACS-9910:
Using the Control Panel
Using the Monitor Utility
These two methods are functionally identical. Only the interface differs. In each, the user
scrolls through menus and submenus to locate and select the desired configuration option.
36
Turn to Setting connection parameters and map each slice to a
LUN
The Quick Setup option provides a convenient and rapid way to set up a simple
array. See Chapter 3.
For instructions on navigating through menus using the control panel, turn to
the section Control Panel in Chapter 1.
A full list of Control Panel LCD messages is given in Appendix C.
For instructions on using the Monitor Utility, turn to the section Using the
Monitor Utility in Chapter 4.
The control panel cannot be used in configuration mode while a Monitor
Utility connection is running. If you wish to configure using the control panel,
first exit the remote terminal.
ACS-9910 User's Manual
Advertisement
Table of Contents
