Accessing The Main Menu; Using The Monitor Utility - Accusys ACS-9910 User Manual

Accessing the Main Menu

The section describes in detail the steps needed to call up the Main Menu using both the
Monitor Utility and Control Panel.

Using the Monitor Utility

1. Run HyperTerminal (or the terminal program used to establish an RS232 connection
with ACS-9910) and open the connection established with ACS-9910 in Chapter 4.
2. Press Ctrl D to launch the Monitor Utility. The Menu area will be blank.
3. The Output area is active. Press Tab once to switch to the Menu area.
4. With the Menu area active, press Enter.
You will be prompted to enter a password.
5. Enter the password.
6. Press Enter. The Main Menu will appear.
38
The default password is 00000000 (eight zeros). The system administrator
should change this on first login. The password can be changed under the User
Params Menu.
ACS-9910 User's Manual