Quick Setup With The Monitor Utility - Accusys ACS-9910 User Manual

Chapter 3 – Quick setup

Quick Setup with the Monitor Utility

Users wishing to perform Quick Setup via the monitor utility must first establish a connection
between the host terminal and ACS-9910. Follow the instructions in Chapter 5, Accessing the
Monitor Utility. Then:
1. Press Ctrl and D together to launch the
Monitor Utility.
2. Press Enter. You will be prompted to enter
a password.
3. Enter the Default Password 00000000
(eight zeros. Press Enter.
4. The Main Menu will appear.
5. Use the arrow keys to select 2 Quick
Setup. Press Enter.
6. The Quick Setup submenu lists the RAID
levels available (0, 1, 3, 5 and 0+1). Scroll
through the list until the appropriate RAID
level for the array you want to set up is
highlighted. Press Enter.
7. You will be prompted to select the number
of disks for inclusion in the RAID. The
minimum number of disks for that level
array will be shown.
8. Finally, you will be prompted to confirm
your choice. Select Yes and press Enter
to complete Quick Setup.
This section is intended as a Quick Setup guide only. Full instructions on
accessing and using the Monitor Utility are given in Chapter 4.
The contents of all submenus other than Quick Setup are explained in detail in
Chapter 5.
Full explanation of the different RAID levels available is given in Appendix B.
Quick Setup cannot be used to set up more than one array.
29