Pager Info Menu - Accusys ACS-9910 User Manual

Pager Info Menu

7.2.1 Paging
Enable or Disable the Pager alert function (Default: Disable)
7.2.2 Pager 1 No.
Enter the first pager's terminal telephone number (also called the 'port number' or
'TAP port number') and the pager pin number (if required for pager). Maximum 16
characters.
7.2.3 Pager 2 No.
Enter the second pager's terminal telephone number (also called the 'port number'
or 'TAP port number') and the pager pin number (if required for pager). Maximum 16
characters.
7.2.4 Code
Enter the alert message for pager 1 under Part 1.
Enter the alert message for pager 2 under Part 2.
7.2.5 Repeat #
Select how many times the alert message(s) should be sent: 5, 10, 15 or 20 times
(Default: 5).
7.2.6 Interval
Select the interval between dispatch of repeated alert messages: 5, 10, 15 or 20
minutes (Default: 5).
7.2.7 Page Now
Instruct ACS-9910 to send a test pager alert immediately.
50
Pager alert messages may be up to 16 alphanumeric characters in length.
When the above data has been entered appropriately, go to the Save Config
submenu to update settings so that the configuration changes are saved.
ACS-9910 User's Manual