Table of Contents
Advertisement
Chapter 2 – Installation
2. Connect a SCSI cable from the host
system SCSI card to the SCSI host
connector on the backplane.
3. Connect the combo cable to the connector
on the backplane. The notch on the combo
cable connector should be aligned with the
corresponding slot on the backplane
connector to ensure correct insertion.
4. Connect a power cable to the connector on
the backplane. The power input connector
is identical to a standard hard drive power
connector.
The combo cable provides a variety of monitoring options:
The RS232 cable is required for the use of the Monitor Utility
The modem connector enables the automatic dispatch of alert faxes
The monitor connector enables simultaneous monitoring of a subsystem
fan, temperature gauge and UPS (uninterruptible power source)
See Supplied accessories in Chapter 1 for more on the combo cable.
25
Advertisement
Table of Contents
