Table of Contents
Advertisement
Preface
About this Manual
Intended user
This manual is designed and written for users of the ACS-9910 RAID controller. The user
should ideally be familiar with RAID planning and data storage operations and have
experience in electronic or computer engineering.
Organization of the manual
This manual consists of the following sections:
Chapter 1:
Introduction provides details of key features, checklists of package contents
and user requirements, and an overview of the controller box and its features.
Chapter 2:
Installation guides you through process of installing DRAM in ACS-9910 and
integrating the controller into a system. This chapter also details procedures for
replacing components.
Chapter 3:
Quick Setup explains how to set up an array in seconds.
Chapter 4:
Accessing the Monitor Utility tells you how to access and start using the
firmware-based Monitor Utility on the host terminal.
Chapter 5:
Configuration details and explains the rich configuration options available for
ACS-9910 arrays, using either the control panel or Monitor Utility.
Appendix A: Troubleshooting helps you deal with encountered problems in the form of
Q&A.
Appendix B: Introduction to RAID levels contains all the information you need to
understand the features of different RAID levels.
Appendix C: Optional Components contains instructions on installing daughterboards to
augment your RAID controller's capabilities.
Appendix D: Control Panel Messages defines the status and error messages of the control
panel LCD display.
Appendix E: Glossary defines relevant technical terms used in this manual.
Appendix F: Specifications list technical specification of ACS-9910.
Appendix G: Contact Us lists contact details of Accusys business units around the world.
3
Advertisement
Table of Contents
