Updating The Firmware - Accusys ACS-9910 User Manual

A.9 Smart
Select to display information about each slot in the Monitor Utility Output window
(this information cannot be viewed from the control panel).
A.10 Update ROM
Use this option to update the ACS-9910 programmable firmware. See Updating the
Firmware later in this chapter.

Updating the Firmware

ACS-9910 is shipped with firmware installed. The user may however wish to download new or
upgraded editions of the firmware to the controller. Ask your vendor about the latest firmware
edition or refer to the website www.accusys.com.tw
A terminal emulation program, such as HyperTerminal, is required to download firmware.
56
Configuration changes made in the Utility Menu must be saved to the
ACS-9910 non-volatile memory for the changes to take effect. This is done is
done in the Saving Config Menu located at Main Menu > Saving Config Menu.
See Saving Configurations earlier in this chapter.
Shutdown the host computer system(s) before downloading the new firmware.
Array data and configurations are not affected by updating of firmware.
ACS-9910 User's Manual