Entering And Editing Alert Settings; Pager Alert Settings - Accusys ACS-9910 User Manual

Chapter 5 – Configuration

Entering and editing alert settings

The administrator can specify two fax numbers and two pager numbers to which alert
messages will be sent in the event of an error with ACS-9910. To configure alert settings,
follow the instructions in succeeding sections to:
1. Configure pager settings
2. Configure fax settings
3. Configure modem
4. Update settings in the Save Config submenu

Pager alert settings

Pager alert settings are all entered and edited from the Pager Info submenu, located at Main
Menu > User Params Menu > Pager Info
7
7.2 Pager Info
User Params
A modem must be connected to ACS-9910 via the combo cable modem
connector for the alert feature to work.
7.2.1 Paging
7.2.2 Pager 1 No.
7.2.3 Pager 2 No.
7.2.4 Code
7.2.5 Repeat #
7.2.6 Interval
7.2.7 Page Now
Enable / Disable
7.2.2.1 Telephone No.
7.2.2.2 Pin No.
7.2.3.1 Telephone No.
7.2.3.2 Pin No.
7.2.4.1 Part 1
7.2.4.2 Part 2
5 / 10 / 15 / 20
5 / 10 / 15 / 20
49