Before You Begin; What's In The Box; What Else You Need - Accusys ACS-9910 User Manual

Before you begin

What's in the box

Some vendors may ship certain components as standard, while other vendors treat the same
component as optional. In its most basic configuration, your package should include the
following:
ACS-9910 Controller Box ×1
ACS-9910 Controller User's Manual ×1
3-in-1 Combo Cable ×1
10-pin to 9-pin D-sub male Interface
Cable
Mounting screws (bag) ×1
The following item(s) is (are) normally optional, but some vendors may choose to include
them in the basic package:
SO DIMM Memory Module

What else you need

What else you need
SCSI hard disk drives: Different RAID levels requires different numbers of HDDs.
Turn to Appendix B to determine how many HDDs you require.
Disk array enclosure: The proper enclosure should be able to accommodate the
SCSI drives, a power supply, and at least one 5¼" half-height device, i.e. the
ACS-9910 controller box.
SCSI cables (and terminators unless ACS-9910 device termination is enabled).
Dedicated VT-100™ Compatible terminal (or PC with third party communication
software that supports ANSI terminal emulation) and Null Modem Cable:
Required for viewing Monitor Utility.
External power connector (same connector as for HDDs).
Static grounding strap or electrostatic discharge (ESD) safe work area.
External power connector (same as a HDD).
Host computer with SCSI card interface
Host computer with Fibre interface (optional; Fibre to SCSI configuration).
Fibre cable with two 3-pin PTP connectors (optional; Fibre to IDE configuration
only).
14
For non-proprietary accessories, such as memory modules, cables, etc., your
vendor may be able to recommend compatible and reliable brands.
ACS-9910 User's Manual