Setting Array Parameters; Edit Array Menu - Accusys ACS-9910 User Manual

Setting array parameters

ACS-9910 supports up to 4 separate arrays, each of which may have its own RAID level.
Different arrays, when created on different hard disks, can be installed on different device
channels. The parameters of the individual ACS-9910 array (or arrays) are set and
reconfigured from the Edit Array submenu located at Main Menu > Edit Array.

Edit Array Menu

3 Edit Array 3.1 Array 1
3.2 Array 2*
3.3 Array 3*
3.4 Array 4*
*Submenus as for Array 1
3.5 Write Cache
3.1-3.4 Array 1/Array 2/Array 3/Array 4
For each array you wish to set up or edit, first select: a RAID level, then define the
size of array slices (or choose not to partition the array).
42
3.1.1 Level 5
3.1.2 Level 3**
3.1.3 Level 1**
3.1.4 Level 0**
3.1.5 Level 0+1**
3.1.6 Slice 1
3.1.7 Slice 2
3.1.8 Slice 3
3.1.9 Slice 4
3.1.A Erase
Enable / Disable
Data lost during array reconfiguration cannot be recovered. You are strongly
advised to backup all data before reconfiguring.
ACS-9910 User's Manual
3.1.1.1 S1-S10
**Submenus as for Level 5