Using The Monitor Utility - Accusys ACS-9910 User Manual

Using the Monitor Utility

Once a connection has been set up between ACS-9910 and the host computer:
1. Make sure ACS-9910 is turned on
2. Press the Ctrl and D keys together to launch the Monitor Utility.
The Monitor Utility has four sections:
The Top Bar lists the RAID controller model number and the firmware (Monitor Utility) model
number.
The Control Panel LCD Output panel mirrors the appearance of the controller box LCD. Full
explanation of LCD messages is given in Appendix C.
The Menu window is the space into which menus are called up. Full instructions on
navigating through the menus are given in Chapter 4.
The Output window displays the current status of the RAID controller and arrays.
The Control keys enable the user to navigate through and between the output and menu
areas.
32
To enlarge the size of the Monitor Utility window in HyperTerminal, select
Font... from the View menu and increase the font size.
ACS-9910 User's Manual