Table of Contents
Advertisement
Default Serial Port Settings
The baud rate can be changed using the interface on front panel.
Modem Connection
ACS-9910 can be connected to a modem to allow remote notification in the event of an error.
If a modem is properly connected to the modem header of the extension cable, you can
configure the ACS-9910 to notify the administrator in case of malfunction. Supported
notification devices are fax and pager.
UPS Connection
The ACS-9910 controller can be connected to a UPS (Uninterrupted Power Supply) device for
additional power supply security. In the event of any power failure on the main power
connector, the UPS will take over and assure sustained operation for a certain period of time.
18
Property
Baud Rate (bps)
Stop Bit
Data Bit
Parity
A UPS connected to the ACS-9910 will keep the controller box running. You
still need to ensure that the system of which the ACS-9910 also has a separate
sufficient backup power solution. In order to protect the continuous operation
of the ACS-9910 and all disks connected, you need to ensure that the power
supplied by the UPS suffices the demand. Check your UPS vendor for more
information.
ACS-9910 User's Manual
Default
19200
1
8
None
Advertisement
Table of Contents
