Chapter 4 - Accessing The Monitor Utility - Accusys ACS-9910 User Manual

Chapter 4 – Accessing the Monitor Utility
1. Launch HyperTerminal from the desktop of
the host computer (Start > Programs >
Accessories > Communications >
HyperTerminal).
2. The Connection Description dialog box
will appear (if this is the first time you have
run HyperTerminal, you will first be
prompted to enter information about your
location). Enter a name to identify the
RAID controller connection (e.g. Accusys
or 9910) and select an icon to represent
the connection. Press OK.
3. The Connect to dialog box appears.
Select COM1 or COM2 from the Connect
using: dropdown menu, depending on
which port is linked to ACS-9910. Click
OK.
4. The COM Properties dialog box will
appear. Set the following values:
Bits per second: 19,200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/Xoff
5. Click OK. The HyperTerminal connection
to ACS-9910 is now established.
19200
31