Table of Contents
Advertisement
Chapter 5 – Configuration
Finding your way around the menus
The Main Menu is the hub for all configuration choices. It
consists of 11 submenus. All configuration options are
exercised from within these submenus. The Main Menu, as
viewed from the Monitor Utility, is shown:
The table below is a quick reference resource to help you find your way around the
submenus:
Name of submenu
Edit Chassis
Quick Setup
Edit Array
Edit Chan
View Config
RS232 Params
User Params
Save Config
Restart
Utility
Functions
Set parameters for the entire RAID system
Quickly establish a single array – see Chapter 3
Reconfigure, delete or set parameters for a single or
multiple arrays
Set host and disk channel parameters including LUN
mapping
View system and RAIDS settings
Set parameters for modem connection and RS232
connection to terminal
Set / enable / disable password security
Configure fax and pager alert settings
Save new configurations
Restart or shutdown the RAID controller
Enable/ Disable beeper
Check existing arrays
Add and remove disks to existing arrays
Cancel / start disk rebuilding
Cancel error messages
Expand array
View slot information
Update firmware
37
Advertisement
Table of Contents
