Password Security; Password Info Menu; Entering And Editing Alert Settings - Accusys ACS-8990 User Manual

Password security

The administrator can enable password security and set the password from the Password
Info submenu located at Main menu > System Params menu > Password Info
4
4.1 Passwd info
System params

Password Info menu

4.1.1 Passwd check
Enable or Disable the Password security feature. When enabled, users will be
asked to enter the password when first accessing the main menu (Default: Disable).
4.1.2 Set Passwd
Enter a password of up to eight alphanumeric figures. The default password is
00000000 (eight zeros).

Entering and editing alert settings

The administrator can specify two fax numbers and two pager numbers to which alert
messages will be sent in the event of an error with ACS-8990. To configure alert settings,
follow the instructions in succeeding sections to:
1. Configure pager settings
2. Configure fax settings
3. Configure modem
Update settings in the NVRAM submenu
60
ACS-8990/89200/89230 User's Manual
4.1.1
Passwd Check
4.1.2
Set Passwd
Configuration changes made in the Password Info menu must be saved to the
ACS-8990 non-volatile memory to take effect. This is done in the NVRAM
menu accessed from the Main menu.. See Saving Configurations later in this
chapter.
A modem must be connected to ACS-8990 via the combo cable modem
connector for the alert feature to work.
Enable / Disable