Page And Fax Notification; Modem Port Settings; Modem Access - Accusys ACS-8910 User Manual

Page and FAX Notification

5.
The ACS-8910 supports automatic notification by PAGER or FAX in the event that a disk failure
occurs when the Operation Mode is in use. Enabling the Pager and FAX features of the
ACS-8910 during Configuration Mode does this. The following sections describe the
requirements for PAGE and FAX Notification and step-by-step instructions for enabling these
options.

5.1 Modem Port Settings

The following are the settings supported by the Page and FAX Notification options. These options
support any external Data/FAX modem.
Parameter
Baud Rate
Stop bits
Data Bits
Parity
Flow Control

5.1.1 Modem Access

Attach the external modem to the Modem port located on the back of the ACS-8910. Attach the
modem cable (provided by the modem manufacturer) from the Modem port located on the back of
the ACS-8910 to the connector at the back of the modem.
The ACS-8910 provides a generic initialization string that is compatible with most modem models.
However, if your modem requires its own initialization string (specified in the modem users guide)
refer to section 3.3.5 System Params for instructions on changing the default initialization string.
Value
2400, 4800, 9600, 14400, 19200,
28800, 38400, 57600, 115200
1, 2
7, 8
None, Odd, Even
Software Flow Control
(XON/XOFF)
Default Value
115200
1
8
None
Enabled
58